Custom Wrestling Fight Shorts

Four different bottoms for four different mat-room moments. Fight shorts (this product) are the traditional shorter cut — 7-9 inch mid-thigh inseam with split-leg construction for BJJ-style grappling drills, no-gi rounds, and open-mat training where a knee-length board short would ride up during ground transitions. Board shorts are the MMA-style knee-length cut with Velcro closure — cross-environment wear for strength training, team travel, and pre-match warmup walkouts. Compression shorts are the skin-tight 4-way stretch base layer worn under the singlet during competition or alone during weigh-ins. The singlet is the competition garment only — it wrestles, then comes off between matches. Programs that cross-train BJJ or no-gi typically run fight shorts as the daily mat-room short; programs focused only on folkstyle / freestyle wrestling lean on compression + warmup pants instead.

Wrestling fight shorts run a mid-thigh inseam — typically 7-9 inches — which sits above the knee for full hip-extension and shot-setup mobility without the short riding up during ground work. The shorter cut is the difference between a fight short and a board short: board shorts are 9-11 inches and knee-length (cross-environment wear); fight shorts are 7-9 inches and stop at mid-thigh (mat-room grappling). Compression shorts run shorter still (5-7 inches, above mid-thigh) because they're worn as a base layer under the singlet. The 7-9 inch fight short is the cleanest cut for BJJ-style drills and no-gi rounds where the short needs to clear the leg during deep shots and high crotch finishes.

The split-leg construction is the defining structural feature of a fight short — the side seam splits at the hem to open the full hip width during explosive shot setups, level changes, and lateral mat movement. That dynamic flex means the leg panel near the split is in constant motion during training, which cracks sewn-on tackle twill patches at the stitch lines within a few weeks of mat-room use and puckers embroidery thread on the curve where the split begins. Sublimation dye-fuses graphics permanently into the 100% polyester woven shell with zero raised finish — flat against the leg, no stitching to break loose during ground transitions. Screen printing works on the flat front panel away from the split (cost-effective option for bold single-color logos on large program orders). Tackle twill and embroidery aren't run on fight shorts for that flex reason.

There's no minimum order quantity for the Custom Wrestling Fight Shorts — order as few as 1 pair for an individual wrestler, or scale up through our volume tiers (1-24, 25-50, 51-100, and 101-500+ pairs) for lower per-pair pricing as your order grows. Free shipping is included on every order, regardless of size. Mixed sizes are welcome within a single order at no extra cost — Youth through Adult 4XL all ship together at the same per-pair tier price, so a roster spanning multiple weight classes orders as one combined run.

Standard production time is 2-4 weeks from the time you approve the final design mockup. This includes pattern cut, in-house sublimation across the 100% polyester woven shell, split-leg assembly, reinforced flatlock seam stitching, quality inspection, and shipping. We also offer rush production for urgent orders — contact us to discuss expedited timelines. Tracking information is provided once your order ships so you know exactly when to expect delivery.

Two decoration methods on wrestling fight shorts: full sublimation across the 100% polyester woven shell (unlimited colors, no per-color upcharge, no raised finish), and screen printing for bold single-color school logos on the flat front panel. Tackle twill and embroidery aren't run on fight shorts because the split-leg construction flexes constantly during grappling — sewn-on patches crack at the stitch lines and raised embroidery puckers on the moving leg panel. Within sublimation every team colorway is open: school name on the leg, athlete number in any placement, full-bleed graphics, side stripes, gradients, secondary panel colors — all dye-fused at the same per-pair price with no setup or color-count fees. Color file matches the team singlet exactly when both run on the same in-house production order. Free design mockups are sent within 12 hours so you can preview the final look before production begins.