Every custom esports jersey, performance polo, hoodie, and stream-day piece we ship comes with two promises to your org:
Nothing is made until you approve it: a free mockup within 12 hours and unlimited changes. If we make a mistake, report it within 30 days of delivery and we remake it free.
Same-dye-batch consistency: Your whole order is made in the same dye batch, so jersey number 1 and jersey number 10 match in color. No mismatched team colors showing up on stream.
Questions about your roster or kit for the next LAN event or scrim block? Reach a real HAMCO uniform specialist by phone or email, not a chatbot.
Why Teams Choose Hamco Esports Apparel
A college roster can sit through an 8-hour scrim block on Saturday, then go live on the team stream that evening, under studio lights with headsets on. By Monday the jersey collar has soaked up a full day of headset-strap sweat.
Hamco builds for that schedule. Our gaming jersey is lightweight, moisture-wicking polyester with your design dyed into the fabric by full sublimation, made for long sessions under studio lighting. Pair it with performance polos for the coaching staff, and with sideline hoodies and bomber jackets for travel days and team photos.
Care Instructions for Esports Apparel
Esports gear absorbs sweat at the collar from the headset strap, deodorant residue at the underarm, energy-drink stains, and the deep funk that develops when a sweaty scrim jersey sits in a backpack overnight. Polyester sublimation handles tougher chemistry than cotton, but smart laundry habits still matter:
- Headset-strap collar sweat-through: Pre-treat the inside collar with cold water and an enzymatic spray before every wash. The salt residue from sweat breaks down stretch fibers if it stays after the dryer cycle.
- Energy-drink stains: Cold-water rinse within 30 minutes. Sugar-based stains caramelize into polyester if they go through a hot dryer cycle uncleaned.
- Mouse-hand cuff wear on arm sleeves: The forearm zone takes the most repeated stretch from mouse-arm flexion. Hand-wash arm sleeves in cold water and air dry to preserve the compression fit.
- Wash cycle: Cold water, inside out, mild detergent, gentle cycle. No bleach. No fabric softener (softener coats wicking fibers and kills the wicking).
- Drying: Hang dry preferred. Tumble on low if needed. Hot dryer cycles fade sublimation slowly over many cycles and shrink the polo collar over time.
- Storage between LAN events: Fully dry before bagging. A damp jersey in a backpack overnight grows bacteria the next morning's wash never fully clears.
Sublimated dye is locked into the polyester fiber, not sitting on the surface like screen print.
Esports Competition Level Matcher
We make kit for every level of the esports ladder, from middle-school squads up through collegiate and pro-development rosters. Pick your tier, tell us your league's rules and stream specs, and we'll design to them:
- Middle school esports: Youth-cut jerseys, soft polo collars, simple two-color sublimation.
- High school varsity esports: Lightweight sublimated jerseys, school-mascot crest on the chest.
- Collegiate esports: Sublimated jerseys with sponsor placement, matching travel-day bomber jackets, performance polos for the coaching staff at broadcast events.
- Amateur tier: Standard team jerseys with personal gamer-tag back-panel, sponsor placements per personal sponsorships.
- Semi-pro & pro-development tier: Several sponsor logos across the chest and sleeves, with detailed sublimated art that reads clearly on stream.
- Pro tier: Multi-sponsor kit, matching home and away color variants, separate stream-day kit and LAN-event kit.
One order, no minimum, free mockup within 12 hours.
Esports Programs & Leagues
Esports does not have a single governing body the way traditional sports do. The competitive landscape is layered across publisher-run pro leagues, collegiate sanctioning bodies, HS league operators, and amateur ladder platforms. These are the main ones:
- PlayVS: a high school esports league platform. See the platform at playvs.com.
- NFHS Esports: the National Federation of State High School Associations endorses HS esports through state-level partnerships. Per the NFHS resource at nfhs.org esports resources, no formal dress code applies at the national level (state-by-state guidance varies).
- NACE (National Association of Collegiate Esports): a collegiate esports association. See the membership site at nacesports.org.
- LCS (League of Legends Championship Series): the top North American League of Legends pro circuit.
- VCT (Valorant Champions Tour): Riot's Valorant pro circuit, including VCT Americas.
- Overwatch League / Overwatch Champions Series: Blizzard's Overwatch pro circuit and successor leagues.
- Call of Duty League (CDL): Activision's CoD pro league with city-franchise structure.
- RLCS (Rocket League Championship Series): Psyonix/Epic's Rocket League pro circuit, regional and global.
- FNCS (Fortnite Champion Series), ALGS (Apex Legends Global Series), Smite Pro League, CSGO/CS2 ESEA, ESL, DreamHack, Faceit: the broader publisher-circuit map.
Tell us the publisher, league or sanctioning body your team competes under, and its sponsor-placement rules, and we'll design to them.
Esports Apparel Fabric & Performance Specs
Here is what goes into a Hamco esports jersey, polo, and sideline piece:
- Gaming jersey: Lightweight, moisture-wicking sublimation-grade polyester for long scrim blocks. Sublimated front crest, gamer-tag back panel (centered for webcam framing), sleeve sponsor placements. Sleeve-stripe sublimated design is the gaming jersey aesthetic norm.
- Performance polo: Moisture-wicking knit with a polo collar. A sublimated chest logo is included; your quote shows the price for an embroidered one.
- Arm sleeve: Compression knit with a sublimated gamer tag on the forearm; see our guide to compression sleeves for long gaming sessions. Sublimation only.
- Sideline pullover hoodie & full-zip hoodie: Soft fleece, with sublimated graphics or an embroidered chest logo; your quote shows the embroidery price. Made in the same dye batch as the rest of your order.
- Bomber jacket: Sublimated panels and an embroidered chest logo. A warm outer layer for events and road trips.
- Track jacket: Full-zip closure, sublimated body design, embroidered chest logo. Lighter sideline option for warmer venues.
- Polo shirt (classic): Embroidered chest logo. Coaches' and team-management kit.
- T-shirts (short-sleeve, long-sleeve): Screen-printed or sublimated team graphics. Practice and content-day staples.
- Esports pants & jogger pants: Tapered or athletic fit with side pockets.
- Cap: Embroidered crown logo on a structured 6-panel cap. Sublimation NOT supported on the front-of-cap dome due to seam interference.
- Backpack: Laptop-compartment sized for streaming gear, peripherals, and merch. Embroidered front-panel logo plus sublimated panel design optional.
Esports Customization Options
Every piece we build is fully customizable, from the sublimation art down to the sponsor-patch placement:
- Gamer-tag back panel: Centered for webcam framing. Each player's personal IGN (in-game name) sublimated above or below the team name. Multi-line gamer-tag layouts supported for two-name tag conventions.
- Sponsor placements: Chest center, chest left, sleeve cap, back panel, sleeve cuff.
- Sleeve-stripe sublimation design: Vertical sleeve stripes in team colors, dyed into the fabric.
- Webcam-friendly logo placement: Chest center is the prime real estate (not buried left or right). For broadcast events, the team crest sits where the camera frames it.
- Cap embroidery only (no front-dome sublimation): Per the cap construction, sublimation is not supported on the front-of-cap dome due to the panel seam. Embroidered logo only on caps; sublimation supported on the side panels and crown back.
- Stream-friendly contrast colors: Provide the broadcast graphics card overlay colors and our art team designs the jersey colors to contrast against the lower-thirds for visibility.
- Color matching: Provide a PMS code or a sample swatch and our art team matches it. Your whole order is made in the same dye batch, so colors match across jerseys, polos, hoodies and bombers.
If your league or publisher circuit has uniform rules, send us the broadcast guide with your logo files, and we'll design to it before the mockup goes out. Not sure what else to send? Our esports jersey template lists every line of a design brief, from team colors and logo files to the roster.
What Makes Hamco Custom Esports Apparel Different
Esports orgs comparing custom apparel vendors usually evaluate on three axes. Quality of the actual fabric. Fit and comfort for long sessions. And whether the supplier still exists in three seasons.
Hamco has been designing custom team uniforms in the USA since 2011. No vanishing act and no resold stock. Our in-house designers design your uniforms, and our own factory overseas makes them to your approved mockup.
Same-dye-batch consistency means jersey #1 in your order matches jersey #10 in color. Hamco builds it into every order because mismatched team colors showing up on stream is the kind of complaint that costs reorders.
No minimum order. Free digital mockup within 12 hours. Volume pricing tiers at 1 to 24, 25 to 50, 51 to 100, and 101+ pieces. Free shipping anywhere in the United States. Ready 2 to 3 weeks after you approve the mockup, then 3 to 5 days to your door. Real people answer your calls and emails, not a chatbot.
Running esports alongside traditional athletics? We make custom basketball uniforms too: same design team, same free mockup within 12 hours, one supplier for the whole athletic department.